Ozeki Phone System XE VoIP PBX software
is an advanced PBX built for automated voice calls and 2 way SMS messaging. It
has outstanding APIs for software developers. It can be used for:
Mobile message type specification - Ringtone SMS
(SMS message type, SMS message format)
Introduction
Ringtones are little melodies and tunes created to give a
unique sound
to the GSM phone when the phone is ringing. Ringtones can be composed with an
appropriate editor and they can be sent as SMS messages.
Support for operator logos in Ozeki NG - SMS Gateway
When a ringtone is sent as an SMS message, it is represented as a bitstream.
This bitstream can be pictured as a set of hexadecimal numbers.
<ringing-tone-programming> Command part 1 (with filler bit)
0011101
<sound> Command part 2
001
<basic song type>
0100
<song title length> 4 characters (ISO-8859-1)
01110100
the first character T
01100101
the second character E
01110011
the third character S
01110100
the fourth character T
00000001
<song sequence length> 1 song pattern
000
<pattern header> pattern header ID
00
<pattern id> A-part
0000
<loop value> no loop
00001101
<pattern specifier> <length of the new pattern> 13 pattern
instructions
100
<tempo
instruction id>
10000
<beats per minute> 160
(i.e., length of 1/4 note = 0,38 sec.)
001
<note
instruction id>
0101
<note value> note E
010
<note duration> ¼ note
00
<note duration specifier>
no special duration
001
<note instruction id>
0110
<note value> note F
010
<note
duration> ¼ note
00
<note duration specifier> no
special duration
001
<note
instruction id>
1000
<note
instruction> note G
010
<note
duration> ¼ note
00
<note duration specifier> no
special duration
001
<note instruction id>
0101
<note value> note E
100
<note duration> 1/16 note
00
<note duration specifier> no special duration
001
<note
instruction id>
0101
<note value> note E
011
<note duration>1/8 note
00
<note duration specifier> no
special duration
001
<note instruction id>
0101
<note value> note E
010
<note duration> ¼ note
00
<note duration specifier> no special duration
001
<note instruction id>
0101
<note value> note E
001
<note duration> ½ note
00
<note duration specifier> no special duration
001
<note instruction id>
0101
<note value> note E
000
<note duration> full note
00
<note duration specifier> no special duration
010
<scale instruction id>
00
<note scale> Scale-1
(i.e., note A is 440 Hz)
001
<note instruction id>
0000
<note value> pause
010
<note
duration> ¼ note
00
<note duration specifier> no special duration
010
<scale instruction id>
01
<note scale> Scale-2
(i.e., note A is 880 Hz), default
001
<note instruction id>
1001
<note value> Gis ' i.e. As '
000
<note duration> full note
00
<note
duration specifier> no special duration
0000000
filler bits
00000000
<command end> end of the ringing tone data
Sending a ringtone in SMS
To send a ringtone message with Ozeki NG - SMS Gateway,
you need to specify a message type which tells the software that the message
body contains a ringtone. To send the above example, you would use the following
message type: SMS:RINGTONE. In this case, the message type is made
up of two sections. The first section tells the message server that this is an
SMS message. This way only the service providers supporting this type of SMS will
be considered to deliver the message. The second section is used by the service
provider to use the ringtone encoder.
This encoder will create the protocol data unit (PDU) that will be sent as an SMS
message.
Example:
If you use
the Database user to send and receive
SMS messages with Ozeki NG - SMS Gateway,
you can use the following SQL statement to send a ringtone message:
insert into ozekimessageout (receiver,msgtype,msg,status) values ('+36205222245',
'SMS:RINGTONE','024A3A51D195CDD004001B20550590610560558550548540820849900000','send');
