This guide gives information about how to upgrade your product manually.
Manual upgrade is used if the automatic upgrade failed for any reason.
Step 1.) Copy you original installation
The first step is to copy your current installation, to make sure all the
configuration will be available after you have installed the new version. To
do this open the "C:\Program Files\Ozeki\" directory in Windows Explorer,
select the "OzekiNG - SMS Gateway" subdirectory, then press Ctrl+C, then press
Ctrl+V (Figure 1).
Figure 1 - Make a backup copy of the Ozeki NG SMS Gateway folder
This will create a new directory called: "Copy of OzekiNG - SMS Gateway"
Step 2.) Uninstall your current installation
Go to the Windows "Control panel", and in the "Add remove programs" group, click
"uninstall" on the Ozeki NG entry.
Figure 2 - Uninstall the SMS Software from your system
Step 3.) Delete the "C:\Program Files\Ozeki\OzekiNG - SMS Gateway" dir
This is necessary to have a clean installation. By default Ozeki NG uninstallation
leaves your configuration and your messages in place.
Step 4.) Install the new version
This is a standard installation, you can start by running the downloaded
Step 5.) Copy the configuration files from the backup directory
You need to copy the following directory to the path of the newly installed version:
C:\Program Files\Ozeki\Copy of OzekiNG - SMS Gateway\config
Copy the config directory here: (overwrite the default dir, that was created
C:\Program Files\Ozeki\OzekiNG - SMS Gateway\config
Figure 3 - Copy the SMS software configuration directory from the backup dir
You should also copy the license files (ozeki.serial and ozeki.code).
Figure 4 - Copy the SMS software license code
Step 6.) Restart the service
Restart Ozeki NG SMS gateway service or your computer to make sure the
updated configuration is loaded.
Figure 5 - Restart the service
People who read this also read...