Contents | Search

MMS Service Provider Configuration

This text gives information about how to configure custom MMS settings in Ozeki NG to be able to send and receive MMS messages. Please note that custom settings are required if your service provider is not listed in the MMS Service provider combo box in the GSM Modem configuration form. (For additional information about configuration, please visit the following URL: http://www.ozekisms.com/index.php?owpn=495

How to setup

To configure your GSM modem to be able to send and receive MMS messages using one of the following providers, please open the "MMS settings" tab of the "GSM Modem configuration form" (Figure 1). On this tab, select "Custom settings" in the "MMS service provider" combo box!


Figure 1 - Select Custom Settings in the MMS service provider combo box.

The next step is to select the "Custom settings tab" (Figure 2), and fill in the appropriate values for the GPRS APN, the MMSC url and the Gateway. These values can be found in the table bellow.


Figure 2 - Provide GPRS APN, the MMSC url and the Gateway.

Finally on the "Network settings" tab, enter the username and the password (Figure 3). If you use the same modem for MMS transfers as the one you use for SMS, make sure the "Use existing Internet connection for MMS transfers." checkbox is NOT checked.


Figure 3 - Provide username and password.

Service provider information