How to change frequency in Sierra GSM modems

Download Hyper Terminal

This guide will help you change the frequency when you use a Sierra Fastrack GSM modem. It is useful if your service provider use another frequency than 900/1800 MHz. In this guide you can see how to change the frequency from 900/1800 MHz to 850/1900 MHz. However, other options are also listed in the tables below.

If you use GSM modem for connecting to the mobile network, it can occur that your service provider uses other frequency than the default frequency in the Sierra modem. This default frequency in Sierra Fastrack Xtend GSM modems is 900/1800 MHz.

So before you start to use the GSM modem it is highly recommended to ask your service provider about the used frequency. If they use other frequency than the default 900/1800 MHz, you need to set the GSM modem to the used frequency.

Sierra Fastrack Xtend modems supports the following frequencies: 850, 900, 1800, 1900. You can set the frequency by using AT commands in the modem.

Please follow this guide to change the frequency range of your Sierra Fastrack modem effectively.

It is assumed that Ozeki NG SMS Gateway and a Sierra Fastrack Xtend modem has already been installed to your PC.

First, please stop the Ozeki NG SMS Gateway service by clicking on Stop service (Figure 1).

stop the ozeki service
Figure 1 - Stop Ozeki service

On Figure 2 you can see the message if the Ozeki NG SMS Gateway software has stopped.

ozeki ng sms gateway service is stopped
Figure 2 - Ozeki NG SMS Gateway stopped

Now start Hyperterminal at Start / Accessories / Communications / Hyperterminal (Figure 3). Please note that if you use Windows Vista or newer operating system, you need to download Hyperterminal. You can download Hperterminal from the following website: http://www.hilgraeve.com/htpe/download.html

start the hyperterminal program
Figure 3 - Start Hyperterminal

Create a new connection and provide a name for this connection (Figure 4). Click on OK

providing a new connection name
Figure 4 - New connection name

Select the port that is used by the GSM modem at Connect using drop down menu (Figure 5).

select the port
Figure 5 - Select the port

Select the speed at Bits per second drop down menu. Set it to 115200 (Figure 6). Click on OK.

set the speed
Figure 6 - Set the speed

Check if the connection is successful by typing at command into Hyperterminal. If it returns OK, the connection is successful (Figure 7).

connection is successful
Figure 7 - Connection is successful

Now issue at+wmbs? command to check the frequency. The return values of this command can be the follows:

Return values for at+wmbs? command:

Return value Description
+WMBS: 0,x Mono band mode 850 MHz is selected
+WMBS: 1,x Mono band mode extended 900 MHz is selected
+WMBS: 2,x Mono band mode 1800 MHz is selected
+WMBS: 3,x Mono band mode 1900 MHz is selected
+WMBS: 4,x Dual band mode 850/1900 MHz is selected
+WMBS: 5,x Dual band mode extended 900/1800 MHz is selected
+WMBS: 6,x Dual band mode extended 900/1900 MHz is selected

As you can see at Figure 8 the GSM modem returns +WMBS: 5,0 meaning that it uses 900/1800mhz by default.

check the required frequency
Figure 8 - Check the frequency

If you issue at+wmbs=4,1 the frequency will be change to 850/1900mhz. If OK is returned the change has been successful (Figure 9).

Possible Commands:

CommandDescription
AT+WMBS=0,x Select mono band mode 850 MHz
AT+WMBS=1,x Select mono band mode extend 900 MHz
AT+WMBS=2,x Select mono band mode 1800 MHz
AT+WMBS=3,x Select mono band mode 1900 MHz
AT+WMBS=4,x Select dual band mode 850/1900 MHz
AT+WMBS=5,x Select dual band mode extend 900/1800 MHz
AT+WMBS=6,x Select dual band mode extend 900/1900 MHz

Remark:

  • x=0 : The Plug & Play will have to be reset to start on specified band(s).
  • x=1 : The change is effective immediately. This mode is forbidden while in communication and during Plug & Play initialization.

change the frequency
Figure 9 - Change frequency

You can also check of the change has been successful by at+wmbs? command. If the return value is +WMBS: 4,0 then the the frequency has been set to 850/1900 MHz successfully (Figure 10).

check the chnaged frequency
Figure 10 - Check the changed frequency

You can also check the changed frequency by at+cgmm command. In this case the frequency will be shown in text: MULTIBAND G850 1900 (Figure 11).

frequency in text
Figure 11 - Frequency in text

Now start the Ozeki service by clicking on Start service (Figure 12).

start the service
Figure 12 - Start service

Click on Manage/Configure option to configure Ozeki NG SMS Gateway (Figure 13).

manage/configure options
Figure 13 - Manage/Configure option

Log into Ozeki NG SMS Gateway with your username and password (Figure 14).

log into the ozeki ng sms gateway
Figure 14 - Log into Ozeki NG SMS Gateway

If you have not installed a GSM modem connection in Ozeki NG SMS Gateway, then click on Add service provider. In list select GSM/GPRS modem connection and click on Install next to it (Figure 15).

install a gsm modem connection
Figure 15 - Install a GSM modem connection

On the configuration panel of GSM modem connection select the port at Port drop down menu and click on Autodetect (Figure 16).

select the port and click the autodetect button
Figure 16 - Select the port and click Autodetect

On Figure 17 you can see that the GSM modem has been detected successfully. Click on Click here to open the configuration form link.

gsm modem is detected
Figure 17 - GSM modem is detected successfully

On the configuration panel of the GSM modem click on OK to save the changes (Figure 18).

save the changes you made
Figure 18 - Save the changes

If you have followed this guide, you can check in Events menu of the GSM modem connection that 'The GSM modem is registered to the network' and the 'connection is online' (Figure 19).

gsm modem is now registered to the network
Figure 19 - GSM modem is registered to the network

More information