If you are insterested in how to setup
automated SMS notifications, you should
apply one of the following configurations:
SMS through HTTP requests
SMS from E-mail
SMS from the command line
SMS using txt files
If you are a software developer
you can proceed to adding SMS
functionality to your source code
by clicking on one of the following links:
PHP SMS example
C# SMS example
ASP SMS example
SQL SMS example
Delphi SMS example
If you would like to send
and receive SMS messages from
MS Office applications, please
check out the following links:
Send SMS from MS Excel
Send SMS from MS Outlook
Check out Ozeki SMS Client
The big SMS FAQ
Short Message Service Center (SMSC)
||What is an SMSC? |
A Short Message Service Center (SMSC) is a network element in the mobile
telephone network which delivers SMS messages. It has SMS message forwarding
and SMS message storing functionality.
In more detail an Short Message Service Center (SMSC) is responsible for
handling the SMS operations of a wireless network or an SMS service provider.
When an SMS message is sent from a mobile phone (or from a computer), it will
reach an SMS center first. The SMS center then forwards the SMS message towards
the destination. An SMS message may need to pass through more than one SMSC,
before it reaches the destination. The main role of an SMSC is to store and
forward SMS messages and regulate the process. It also provides billing
support for the carriers.
If the recipient of an SMS messages is unavailable (for example, when the
mobile phone is switched off), the SMS center will store the SMS message for
a period of time. This time can be adjusted by the message sender the network
maximum is usually one week. It the recipient becomes available withing the
message validity period, the SMSC will forward the SMS message.
Very often an SMSC is dedicated to handle the SMS traffic of one wireless network.
A network operator usually manages its own SMSC(s) and locates them inside its
wireless network system. However, it is possible for a network operator to use
a third-party SMSC that is located outside the wireless network system.
You must know the address of the wireless network operator's SMSC in order to
use SMS messaging with your mobile phone. Typically an SMSC address is an
ordinary phone number in the international format. A mobile phone should have
a menu option that can be used to configure the SMSC address. Normally, the
SMSC address is pre-set in the SIM card by the wireless network operator, which
means you do not need to make any changes to it. A list of SMSC numbers can be
found in Appendix G.
||Can I operate my own SMSC?
| ||Yes you can
To setup an SMSC you need a computer that is connected to the mobile network. On
this computer you need appropriate software, that will provide the SMSC
Private SMSCs are usually used by 3rd party SMS service providers. These
providers connect to the mobile network through an
IP SMS connection,
such an SMPP SMS connection,
an UCP SMS connection or a
CIMD2 SMS connection, and they
provide an SMS service to their clients over various
SMS APIs. For
example the Ozeki NG SMS Gateway can be used as an SMSC to provide
SMS service through the
SMPP protocol to any client over the Internet. It can also provide
HTTP SMS API,
C# SMS API,
PHP SMS support, etc.
||Do I have to pay for SMS messages
if I operate my own SMSC? |
SMS message routed to the mobile network from your SMSC will have a cost. You
will pay this cost on a per message basis to the mobile network operator or
to the SMS service provider that allows you to connect your system to the
If you want to send SMS messages to mobile phones from your SMSC, you need a
way to connect to the mobile network, and you cannot do it without signing
up for the service of a mobile network operator or an SMS service provider.
||Can I connect to the SMSC of a
mobile network operator (MNO)? |
If you have Ozeki NG SMS Gateway installed, you can connect to the SMSC of a
mobile network operator over the Internet (or a leased line) using an IP SMS
connection, such as an
connection. To be able to connect you need to sign an agreement with the
mobile network operator and you will have to pay for SMS messages you send
through their SMSC.
||Can I connect to the SMSC of a
mobile network operator through SS7? |
SS7 is the signaling protocol inside a mobile network. It is used in the SMS
between the SMSC, the HLR, and the mobile terminal. It is usually used over
E1 ISDN lines, but it can also go through IP. The IP version of SS7 is called
Ozeki NG SMS Gateway does not implement the SS7 signaling protocol. To connect
to the SMSC, you need to use an IP SMS protocol.
||Is there anyway using any ozeki
product to do HLR Lookup?
to see if numbers exist before sending text? |
HLR lookup would be possible if the SS7 protocol would be implemented in
Ozeki NG SMS Gateway. Since this protocol is not implemented, doing an HLR
lookup is not possible. Even if the SS7 protocol would be implemented there
is a good chance, that the mobile network
operator would not let you connect to their HLR to do such lookups.
1.7 SMS Gateway