If you are insterested in how to setup
automated SMS notifications, you should
apply one of the following configurations:
SMS through HTTP requests
SMS from E-mail
SMS from the command line
SMS using txt files
If you are a software developer
you can proceed to adding SMS
functionality to your source code
by clicking on one of the following links:
PHP SMS example
C# SMS example
ASP SMS example
SQL SMS example
Delphi SMS example
If you would like to send
and receive SMS messages from
MS Office applications, please
check out the following links:
Send SMS from MS Excel
Send SMS from MS Outlook
Check out Ozeki SMS Client
The big SMS FAQ
||What is a delivery report?
A confirmation from the SMSC
that your SMS messages has arrived to the recipient handset
When you submit an SMS message to the mobile network (to an SMSC), you get a
submission report, that contains an ID field called message reference or
callback id. This report indicates that your SMS messages was accepted by
the SMSC for delivery. The message reference (callback id), in this message
submission report is a number or a string, that identifies your message in the
After the message has been accepted by the mobile network (SMSC), and the
message submission report has been returned to the sender, the message is
stored in the SMSC. The message stays there until delivery becomes possible.
This delivery can happen much later, for example if the recipient mobile phone
is offline, and comes online later, it can take days.
When the recipient mobile phone becomes available, the message is delivered to
it. After the delivery is successful to the recipient mobile phone a so called
delivery report is returned. The delivery report indicates that the
SMS has arrived to the recipient handset. This delivery report is an SMS
message, that is sent back to the sender. It contains the recipient phone
number and the message reference (callback id), that was originally
returned to the sender in the message submission report, and it contains
the timestamp of delivery.
In general when we are talking about delivery reports, we refer to the delivery
report, that is returned to the sender in an SMS message, when the SMS is
delivered to the recipient handset.
||Can I adjust how long a message
is stored in the SMSC? |
An SMS message is stored in the Short
Message Service Center (SMSC) if the
recipient mobile phone is offline. For an SMS message it is possible to specify
the period after which the SMS message will be deleted from the SMS center
so that the SMS message will not be forwarded to the recipient mobile phone
when it becomes online. This period is called the validity period.
Here is an example that illustrates how validity period can be used. Suppose
you find a very interesting program that is showing on TV now. You think
your friend may want to watch it. So, you send a text message to tell your
friend about the TV program. Let's say the TV program lasts for an hour.
Your SMS text message will not be useful to your friend if his mobile
phone is not available before the program finishes. In this situation,
you may want to send a text message with a validity period of one hour
to your friend. The wireless carrier will not deliver the SMS text message
to your friend if his mobile phone is not available before the validity period
Every mobile phone has a menu option that can be used to set the
validity period. By default this value is often set to network maximum, which
is usually one week. If you change this setting updated validity period in the
outbound SMS messages automatically.
||Why are my delivery reports
When you operate an SMS gateway, each incoming delivery report should refer
to a previously submitted message. Delivery reports are dropped if no
corresponding message can be found in the system.
The Ozeki software works the following way: When it submits a message to an SMSC,
it receives a reference ID from the SMSC in the form of a submission report.
For example this can be "4529900859:090201170036".
When a delivery report comes in it contains the same reference id:
"4529900859:090201170036". This way we know which messages the delivery
report belongs to.
To give you a better understanding about the implementation, the Ozeki software
builds a table, where it stores the reference IDs pointing to the sent messages.
If a delivery report comes in, that contains a reference ID that is not in this
table, the delivery report is dropped.
The question is, why do you receive a delivery report, that does not relate to
any stored messages. This can happen because of two reasons:
a.) When you have submitted your message, the SMSC did not return the same
reference ID, that was used in the delivery report. Even if one character is
different, the Ozeki software cannot find the related message. To check if
this is the case, please try to find the original message in the event log
of the service provider connection in Ozeki NG, and check the message reference.
b.) Some service providers do not return a unique reference ID to all messages.
This is usually a problem in the service provider's system. If two messages are
accepted with the same reference ID, then the second message will not be
registered in the reference ID table, and delivery reports belonging to that
message will be dropped
c.) Another possible reason that can cause this error message is that
the originally submitted message becomes too old.
The Ozeki SMS software stores SMS message reference IDs for one week.
Incoming delivery reports that refer to messages that were submitted more
then one week ago will be dropped. For example, if the recipient of the SMS
turns his mobile phone on after two weeks, the delivery report signaling
that the message is delivered will not
be accepted. This one week period as a maximum age for delivery reports was
introduced, because a large database cannot be maintained efficiently.
d.) The last possible reason is that the original message is removed from the
system before the delivery report comes in. For example, if you delete the
message from the graphical user interface, from the sent items folder, or
if you have automatic message deletion configured on the Edit/Server
preferences form, it might be possible that the original message will
not be present when the delivery report arrives.
What can I see in the delivery
report registry GUI?
It contains the list of messages that do not get a
delivery report yet.
The message lives in the table until a delivery
report is received. If no delivery report comes in, the message is removed
after one week.
Can I change the time setting
after which messages that got no delivery report are removed from the list?
| ||No, you cannot change this.|
How can I reset the delivery
report registry queue?
| ||There is no direct way to reset this queue. If you
delete the messages from the sent items folder, messages will also be removed
from this queue.|
The delivery report
(onMessageDeliveryFailed) is retrieved for every failed attempt or is just
retrieved when the max number of tries is reached?
| ||It is just retrieved when the max number of tries
||Is it possible to store the incoming
SMS delivery reports into SQL? |
You can open the "Edit/Server preferences" menu item, then click on the
"Advanced" tab and check the "Copy delivery reports for users" checkbox.
If you have an SQL to SMS gateway
configuration configured, the incoming delivery reports will be inserted
into a database as standard incoming messages.
Of course if you use an SQL to SMS
gateway configuration, and you send your messages from the ozekimessgaeout
table, the status field of the records in the ozekimessageout table will
automatically hold information about delivery state. This status field
will be automatically updated to one of the following values if an event
happens with your message:
If I send SMS from a GSM modem,
the GSM protocol allows a max. number of 256 callback id's for delivery
reports. How do you distinguish delivery reports that have the same id.
The ozeki software uses the recipient address and the returned submission
ID combined, to make delivery report matching better.
When you submit an SMS message to the mobile network from a GSM modem, the
mobile network returns a number between 0 and 255 as a reference ID. If a
delivery report comes in, it contains this number, to make it easy to find
which SMS the delivery report belongs to. The problem is that if you send more
then 256 messages from a GSM modem, there will be two (or more) messages with
the same reference ID. e.g.: two messages will have ID 0.
To overcome this problem, the Ozeki SMS software uses the recipient phone number
and the returned reference ID combined to give a unique callback ID. e.g.:
instead of using "0" as the callback ID, the Ozeki software uses
"+36201234567:0" as the callback ID. This way if a delivery report comes
back referring to a message sent to "+36201234567" with
ID "0", there is a significantly better chance to identify the original message,
and to set it's status to deliveredtohandset.
IP SMS connections work differently, they use a much longer unique callback ID,
often a Globaly Unique ID (GUID), which eliminates this problem.
3.1 GSM modem