Mobile message type specification - Binary SMS XML
(SMS message type, SMS message format)
Introduction
To be able to send a binary XML SMS, you need to have
a thorough knowledge of the structure of an SMS message.
You need to be familiar with the following:
Data Coding Scheme (TP-DCS),
Protocol Identifier (TP-PID), User Data Header (UDH) and User Data (UD).
Also, you need to be able to encode different message types into WBXML
format.
This is usually different with each message type.
In the SMS message to be sent, the values mentioned above have to
specified as hexadecimal numbers.
Why it is convenient
This message type allows you to send all types of binary messages.
Message type
SMS:BINARY:XML
The format of the message data is:
<sms> <pid>PID in hexadecimal format (1 byte)</pid> <dcs>DCS in hexadecimal format (1 byte)</dcs> <udh>UDH in hexadecimal format</udh> <ud>UD in hexadecimal format</ud> </sms>
Take a look at an example (e.g., Wap Push):
<sms> <pid>00</pid> <dcs>F5</dcs> <udh>0605040B8423F0</udh> <ud>EA0601AE02056A0045C60C037761702E6F7A656B692E6875000801034F7A656B69000101</ud> </sms>
Interpretation of the string of characters between the UDH
tags:
06: User Data Header length (6 bytes follow)
05: UDH IE Identifier: Port numbers
04: UDH Port number IE length (4 bytes follow: 2 for Destinating port, 2
for Originating port)
0B84: Destinating port
23F0: Originating port
Interpretation of the string of characters between the UD
tags:
EA: Transaction ID
06: PDU type (push)
01: Length of header (1 byte follows)
AE: Content-type: application/vnd.wap.sic
These are followed by the XML of the
WAP Push message type
encoded into WBXML format, following the respective encoding rules.
This is the Wap Push message:
<si> <indication href="http://wap.ozeki.hu" action="signal-high"> Ozeki </indication> </si>
SQL example:
If you use the Database user to send and receive SMS messages with Ozeki NG - SMS Gateway, you can use the following SQL statement to send a Binary XML message, which is a WAP PUSH Service Indication message:
insert into ozekimessageout (receiver,msgtype,msg,status) values ("+36205222245", "SMS:BINARY:XML","<sms><pid>00</pid><dcs>F5</dcs> <udh>0605040B84</udh> <ud>EA0601AE02056A0045C60C037761702E6F7A656B692E6875000801034F7A656B69000101</ud> </sms>","send");
More information
- Bevezetés a mobil üzenettípusokba
- Mobil üzenettípus specifikáció - OTA bitmap SMS
- Mobil üzenettípus specifikáció - Operátor logó SMS, XML
- Mobil üzenettípus specifikáció - Operátor logó SMS, bináris
- Mobil üzenettípus specifikáció - Csengőhang SMS
- Mobil üzenettípus specifikáció - WAP Push SMS
- Mobil üzenettípus specifikáció - Bináris SMS XML
- Mobil üzenettípus specifikáció - VCard SMS
- Mobil üzenettípus specifikáció - VCalendar SMS
- Bevezetés az SMS üzenet jelzésbe
- Mobil üzenettípus specifikáció - Weboldal link, SMS
- Multimédiás üzenet MMS
- Mobil üzenettípus specifikáció - OTA böngésző beállítások SMS
- Mobil üzenettípus specifikáció - OTA SyncML beállítások SMS
- Mobil üzenettípus specifikáció
- Hogyan küldjünk USSD üzenetet
- Mobil üzenettípus specifikáció - WAP Push SL SMS
- Mobil üzenettípus specifikáció - Képüzenet